KROHNE Summit 8800 Vol 1 - Manual (Page 79)

79 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 FIELD DEVICE CONNECTION 06
79 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 OPERATION 07
7 .2 .4 .7 System Information
The System Information Page and Board information page, contains all relevant information for
firmware and Hardware versions fitted in the SUMMIT 8800, together with Silicon Serial Num-
bers of all fitted circuit boards.
Figure 86 System information screen
Unit Name: Flow computer tag
Security Mode: Dipswitch defined
Boot Program: Information related to boot firmware for CPU
Main Program: Information related to configuration revision and software version
Main Board Serial Number: Serial number for CPU
Slot Number: I/O and communication boards installed
Stream Number: Flow computer run configuration
Board Information: I/O and communication board details
Each board has a Boot Program and Main Program. The firmware versions and firmware check-
sum are unique for each program mode. Further details on correct versions and releases can be
requested from [email protected]
Boot Program – Level 1
This program operates the start-up and initialization of all signals, relevant read/ write com-
mands and storage space.
Main Program – Level 2
This program operates all computing signal handling and conversions including calculations.