KROHNE GFC 300 FOUNDATION FIELDBUS - Manual (Page 60)

4
OPERATION
60
GFC 300
www.krohne.com 07/2012 - 4001866001 - AD GFC 300 FF R01 en
PV_SCALE PV_SCALE PV_SCALE PV_SCALE
Process Value Process Value Process Value Process Value
Scale Scale Scale Scale
The high and low scale values, engineering units code, and
number of digits to the right of the decimal point to be used in
displaying the PV parameter and parameters which have the
same scaling as PV.
EU_100
Engineering Unit
100
R/W The engineering unit value which represents the upper end of
range of the associated Block Parameter.
100.0
EU_0
Engineering Unit 0
R/W The engineering unit value which represents the lower end of
range of the associated Block Parameter.
0.0
UNITS_INDEX
Units Index
R/W Device Description units code index for the engineering unit
descriptor for the associated block value.
Uninitialized
DECIMAL
Decimal (Point)
R/W The number of digits to the right of the decimal point which
should be used by an interface device in displaying the
specified parameter.
0
RANGE_HI RANGE_HI RANGE_HI RANGE_HI
Range High Range High Range High Range High
R/W Constant value above which the range extension has switched
to the high range transmitter.
-
RANGE_LOW RANGE_LOW RANGE_LOW RANGE_LOW
Range Low Range Low Range Low Range Low
R/W Constant value below which the range extension has switched
to the low range transmitter.
-
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value