KROHNE GFC 300 FOUNDATION FIELDBUS - Manual (Page 58)

4
OPERATION
58
GFC 300
www.krohne.com 07/2012 - 4001866001 - AD GFC 300 FF R01 en
GAIN_IN_2 GAIN_IN_2 GAIN_IN_2 GAIN_IN_2
Gain Input 2 Gain Input 2 Gain Input 2 Gain Input 2
R/W The constant to be multiplied times (IN_2 + bias). 0
GAIN_IN_3 GAIN_IN_3 GAIN_IN_3 GAIN_IN_3
Gain Input 3 Gain Input 3 Gain Input 3 Gain Input 3
R/W The constant to be multiplied times (IN_3 + bias). 0
GRANT_DENY GRANT_DENY GRANT_DENY GRANT_DENY
Grant Deny Grant Deny Grant Deny Grant Deny
Options for controlling access of host computers and local
control panels to operating, tuning and alarm parameters of
the block.
-
GRANT
Grant
R/W Depending on the philosophy of the plant, the operator or a
higher level device (HLD) or a local operator's panel (LOP) in
the case of "Local", may turn on an item of the "Grant"
attribute - "Program, Tune, Alarm or Local".
Uninitialized
Setting:
Program / Tune / Alarm / Local / Operate
DENY
Deny
The deny attribute is provided for use by a monitoring
application in an interface device and may not be changed by
an operator.
Setting:
Program denied / Tune denied / Alarm denied / Local denied /
Operate denied
IN IN IN IN
Input Input Input Input
Primary input value of the block, required for blocks that filter
the input to get the PV.
Status R/W Digital transducers, unlike their analogue versions, can detect
faults that make the measurement bad or prevent the
actuator from responding. This additional, valuable
information will be passed along with each transmission of a
data value in the form of a status attribute.
-
Value R/W A numerical quantity entered by a user or calculated by the
algorithm.
-
IN_LO IN_LO IN_LO IN_LO
Input Low Input Low Input Low Input Low
Input for the low range transmitter in a range extension
application.
Status R/W Digital transducers, unlike their analogue versions, can detect
faults that make the measurement bad or prevent the
actuator from responding. This additional, valuable
information will be passed along with each transmission of a
data value in the form of a status attribute.
-
Value R/W A numerical quantity entered by a user or calculated by the
algorithm.
-
IN_1 IN_1 IN_1 IN_1
Input 1 Input 1 Input 1 Input 1
Auxiliary input value to the block, used for other values than
the PV.
Status R/W Digital transducers, unlike their analogue versions, can detect
faults that make the measurement bad or prevent the
actuator from responding. This additional, valuable
information will be passed along with each transmission of a
data value in the form of a status attribute.
-
Value R/W A numerical quantity entered by a user or calculated by the
algorithm.
-
IN_2 IN_2 IN_2 IN_2
Input 2 Input 2 Input 2 Input 2
Input required by the characterizer.
Status R/W Digital transducers, unlike their analogue versions, can detect
faults that make the measurement bad or prevent the
actuator from responding. This additional, valuable
information will be passed along with each transmission of a
data value in the form of a status attribute.
-
Value R/W A numerical quantity entered by a user or calculated by the
algorithm.
-
IN_3 IN_3 IN_3 IN_3
Input 3 Input 3 Input 3 Input 3
Numbered input required by selector block.
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value