KROHNE GFC 300 FOUNDATION FIELDBUS - Manual (Page 20)

4
OPERATION
20
GFC 300
www.krohne.com 07/2012 - 4001866001 - AD GFC 300 FF R01 en
FF_BOARD_INFO FF_BOARD_INFO FF_BOARD_INFO FF_BOARD_INFO
FF Circuit FF Circuit FF Circuit FF Circuit
Board Information Board Information Board Information Board Information
R For details see subelements. "Actual values"
IDENT_NUMBER
Ident Number
R Actual ident number
HARDWARE_ID
Hardware Ident
Number
Actual hardware number
SOFTWARE_VER
FF Software Version
Actual software version
PRODUCTION_DATE
Production Date
Date of production
CALIBRATION_DATE
Calibration Date
Date of calibration
FF_SERIAL_NO
FF Board
Serial Number
Actual serial number
OPERATION_HOUR OPERATION_HOUR OPERATION_HOUR OPERATION_HOUR
Operation Hours Operation Hours Operation Hours Operation Hours
R Operation hours since first power-up. Curent operation
hours
PASSWRD PASSWRD PASSWRD PASSWRD
Password Password Password Password
R/W Password to activate access rights to restricted parameters. 0
PROTECT_INFO PROTECT_INFO PROTECT_INFO PROTECT_INFO
Protection Information Protection Information Protection Information Protection Information
R Current protection level to restricted parameters. Production
Setting:
Concentration / bit 5…7 (not used) / User / User / Service
Level / Production / Custody Transfer / Write Lock
SERIAL_NO SERIAL_NO SERIAL_NO SERIAL_NO
Serial Number Serial Number Serial Number Serial Number
R Device serial number and serial number of the system. Current serial
number
SW_SIMULATE SW_SIMULATE SW_SIMULATE SW_SIMULATE
Software Simulate Software Simulate Software Simulate Software Simulate
R/W Enable/disable simulation like simulate "Hardware jumper". Disable
Setting:
Disable / Active
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value