KROHNE GFC 300 FOUNDATION FIELDBUS - Manual (Page 42)

4
OPERATION
42
GFC 300
www.krohne.com 07/2012 - 4001866001 - AD GFC 300 FF R01 en
PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_
202 202 202 202
process pressure process pressure process pressure process pressure
The measured process pressure value and status available to
the Function Block.
-
STATUS
Status
R Digital transducers, unlike their analogue versions, can detect
faults that make the measurement bad or prevent the
actuator from responding. This additional, valuable
information will be passed along with each transmission of a
data value in the form of a status attribute.
-
VALUE
Value
R A numerical quantity entered by a user or calculated by the
algorithm.
-
PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_
RANGE_202 RANGE_202 RANGE_202 RANGE_202
process pressure process pressure process pressure process pressure
range range range range
The high and low range limit values, the engineering units
code and the number of digits to the right of the decimal point
to be used to display the Primary Value.
-
EU_100
Engineering Unit
100
R The engineering unit value which represents the upper end of
range of the associated Block Parameter.
400.0
EU_0
Engineering Unit 0
R The engineering unit value which represents the lower end of
range of the associated Block Parameter.
0.0
UNITS_INDEX
Units Index
R/W Device Description units code index for the engineering unit
descriptor for the associated block value.
Bara
Settings:
psia; Paa; GPaa; MPaa; kPaa; mPaa; haa; g/cm²a; kg/cm²a;
Bara; mBara
DECIMAL
Decimal (Point)
R The number of digits to the right of the decimal point which
should be used by an interface device in displaying the
specified parameter.
3
PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_
203 203 203 203
electronic electronic electronic electronic
temperature temperature temperature temperature
The measured electronic temperature value and status
available to the Function Block.
-
STATUS
Status
R Digital transducers, unlike their analogue versions, can detect
faults that make the measurement bad or prevent the
actuator from responding. This additional, valuable
information will be passed along with each transmission of a
data value in the form of a status attribute.
-
VALUE
Value
R A numerical quantity entered by a user or calculated by the
algorithm.
-
PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_
RANGE_203 RANGE_203 RANGE_203 RANGE_203
electronic electronic electronic electronic
temperature range temperature range temperature range temperature range
The high and low range limit values, the engineering units
code and the number of digits to the right of the decimal point
to be used to display the Primary Value.
-
EU_100
Engineering Unit
100
R The engineering unit value which represents the upper end of
range of the associated Block Parameter.
115.0
EU_0
Engineering Unit 0
R The engineering unit value which represents the lower end of
range of the associated Block Parameter.
-50.0
UNITS_INDEX
Units Index
R/W Device Description units code index for the engineering unit
descriptor for the associated block value.
° C
Settings:
K; °C; °F; °R
DECIMAL
Decimal (Point)
R The number of digits to the right of the decimal point which
should be used by an interface device in displaying the
specified parameter.
2
CURRENT_IN_A CURRENT_IN_A CURRENT_IN_A CURRENT_IN_A
current in A current in A current in A current in A
R (Fct. C2.2
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value