KROHNE GFC 300 FOUNDATION FIELDBUS - Manual (Page 54)

4
OPERATION
54
GFC 300
www.krohne.com 07/2012 - 4001866001 - AD GFC 300 FF R01 en
DECIMAL
Decimal (Point)
R The number of digits to the right of the decimal point which
should be used by an interface device in displaying the
specified parameter.
2
SELECTOR_DIAG SELECTOR_DIAG SELECTOR_DIAG SELECTOR_DIAG
selector diagnosis
R/W Selector for diagnosis values. -
SELECT_DIAG1
diagnostics 1
R/W Options for diagnosis 1 (Fct. C1.16.1) off
Settings:
off / velocity of sound 1 / gain 1 / SNR 1
SELECT_DIAG2
diagnostics 2
R/W Options for diagnosis 2 (Fct. C1.16.2) off
Settings:
off / velocity of sound 2 / gain 2 / SNR 2
SELECT_DIAG3
diagnostics 3
R/W Options for diagnosis 3 (Fct. C1.16.3) off
Settings:
off / velocity of sound 3 / gain 3 / SNR 3
TRANSDUCER_ TRANSDUCER_ TRANSDUCER_ TRANSDUCER_
DIRECTORY DIRECTORY DIRECTORY DIRECTORY
Transducer
Directory Entry
A directory that specifies the number and starting indices of
the data collections in the transducer block.
0
TRANSDUCER_ TRANSDUCER_ TRANSDUCER_ TRANSDUCER_
TYPE TYPE TYPE TYPE
Transducer Type
R Identifies the transducer that follows. Other
XD_ERROR XD_ERROR XD_ERROR XD_ERROR
Transducer Error
One of the transducer error codes defined in the FF
Transducer Specifications in section "4.7 Block Alarm
Subcodes".
0
Settings:
• 16: Unspecified error
• 17: General error
• 18: Calibration error
• 19: Configuration error
• 20: Electronics Failure
• 21: Mechanical Failure
• 22: I/O Failure
• 23: Data Integrity Error
• 24: Software Error
• 25: Algorithm Error
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value