beautypg.com

In-Situ Aqua TROLL 100 and 200 Operators Manual User Manual

Page 61

background image

Page 61

Aqua

TROLL Operator’s Manual

3. In the Sensor Setup window, select the Level parameter, then

click Configure...

The Level parameter shown is the one currently stored in the

device. This is the default or the most recent choice. You will

have a chance to change the parameter later.

Click

Configure...

Select the

Level

parameter

TIP: Parameter
configuration is not
available if the device

is polling or has an active log.

Section 6: Pressure & Level

This manual is related to the following products: