In-Situ Aqua TROLL 100 and 200 Operators Manual - Manual (Page 33)

Page 33 Aqua TROLL Operator’s Manual
4 Using Win-Situ
®
5 Software
Win-Situ 5 Software is the In-Situ instrument control software for
Aqua TROLL Instruments. Use Win-Situ to:
• Display real-time readings from the connected Aqua
TROLL, in meter, tabular, or graphic format
• Program the device to log data; download the logged data
• Calibrate the conductivity sensor, select output parameters
and units
• Customize the output of a pressure/level sensor to record
drawdown, surface water elevation, gauge height, stage
height, etc.
• Set communication options in the device—Modbus, SDI-
12, analog, IP, telemetry, etc.
Launch the Software and Connect Instrument
1. Start Win-Situ by double-clicking the shortcut
created
on the desktop during installation.
TIP: Win-Situ
Mobile provides
Win-Situ 5 features
and functionality in a convenient
field-worthy platform.