In-Situ RDO PRO-X Process Optical Dissolved Oxygen Sensor Manual User Manual
Operator's manual, Pro-x process optical dissolved oxygen probe
Operator's Manual
RDO
®
PRO-X Process Optical Dissolved Oxygen Probe
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
©
2013. All rights reserved.
0088692 | Rev. 003 | 11/2013
This manual is related to the following products:
Table of contents
Document Outline
- 1 Optical RDO PRO-X Dissolved Oxygen Probe Specifications
- 2 Introduction
- 3 Calibrate the RDO PRO-X Probe
- 4 Probe Deployment
- 5 Care and Maintenance
- 6 Controller Requirements and Connections
- 7 Modbus Registers
- 8 Dissolved Oxygen Equations
- 9 Calibration Registers
- 10 Service
- 11 RDO-X Software Troubleshooting
- 12 Appendix A - Communication Device
- 13 Declaration of Similarity