In-Situ Aqua TROLL 100 and 200 Operators Manual - Manual (Page 32)

Page 32 Aqua TROLL Operator’s Manual
Section 3: Getting Started
7. To attach a Cable Connect TROLL Com, first remove the
desiccant from the cable by grasping the textured section
of the cable connector in one hand and the desiccant in the
other. Twist in opposite directions to unlock the desiccant
from the cable.
8. Position the flat edges so they will connect properly, and
insert the TROLL Com connector firmly into the cable
connector.
9. Push, twist, and click to lock.
Make sure you
hear the “click.” The
“click” ensures the
cable is securely attached.