In-Situ Level TROLL 400/500/700/700H Operators Manual User Manual
Operator's manual, Level troll
Operator's Manual
Level TROLL
®
400, 500, 700, 700H Instruments
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
©
2013. All rights reserved.
0052210 | Rev. 009 | 09/2013
This manual is related to the following products:
Table of contents
Document Outline
- 1 Introduction
- 2 Product Specifications
- 3 About the Pressure/Level Sensor
- 4 System Components
- 5 Getting Started
- 6 Field Deployment
- 7 Software Overview
- 8 Using Win-Situ 5 Software
- Connecting an Instrument to the Software
- Selecting the Correct COM Port
- Setting the Instrument Time
- Adding a New Site
- Log Setup
- Logging Method Descriptions
- About the Level Reference
- Starting a Log
- Suspending (Pausing) a Log
- Resuming a Suspended Log
- Stopping a Log
- Downloading Data to a PC
- Viewing Logged Data
- Using BaroMerge Software
- BaroMerge Input—BaroTROLL File
- BaroMerge Output
- Disconnecting an Instrument from the Software
- 9 Connect to a Data Logger or PLC Controller
- 10 Cleaning and Maintenance
- 11 Decontamination and Cleaning Form
- 12 Troubleshooting
- 13 Declarations of Conformity and Similarity