In-Situ Aqua TROLL 100 and 200 Operators Manual - Manual (Page 37)

Page 37 Aqua TROLL Operator’s Manual
Section 4: Using Win-Situ
Set specific information in the software. Win-Situ provides many
options. At a minimum:
• Set the Aqua TROLL clock.
• Enter a name for the site where the instrument will collect
data.
• Calibrate the conductivity sensor.
• Enter data logging instructions.
A brief overview is provided here. For more detailed information,
see the Win-Situ Help menu.
Set the Clock
Data collection schedules depend on the device’s real-time clock.
Both the device clock and the system (PC) clock are shown on
the dashboard. The clocks update every 2 seconds. If the device
clock differs by more than 2 seconds from the system clock, the
device clock is displayed in red. To synchronize the clocks, click
the “Sync” button .
TIP: The
Preferences option
on the Menu
bar allows users to configure
instrument software, including:
• General settings
• Comm settings
• Working directory
• Graph settings
• Home view settings
• Data view settings
Clock Sync
button
Device clock
PC clock