GW Instek PSH-A Series 360W User Manual - Manual (Page 20)

Setup
39
The OCP sign appears on the
upper side of the display. OCP
CV 20.00V 18.00A
4. Press the Output key
OUTPUT
and turn On the output.
5. Make sure the display shows the error message.
Press the Local key
LOCAL
to get
back to the normal display.
OCP Error! Press
“Local” to reset
6. Make sure the output is now turned Off in the display and the
Multimeter / Current Shunt shows no value (No output).
PSH User Manual
40
Rack Mounting (Optional)
PSH can be mounted on standard 19 inch rack using GRA-403
rack mounting kit.
Rack mounting kit contents
Main bracket x 1 Front panel x 1
Large decoration board x 1 Medium decoration board x 2
Small decoration board x 2 Binding plate x 6
Handle x 2 Screw M4 * 0.7 L=10mm x 4
Screw M3 * 0.5 L = 8mm x 18