GW Instek GDB-03 - Manual (Page 93)

GDB-03 Demo Module User Manual
91
A
PPENDIX
Upgrading the GDS-3000/GDS-2000A
Firmware
UPGRADE PROCEDURE
This firmware upgrade guide describes how to upgrade both the
DSO firmware and the operating system kernel.
Note
The following note is for the GDS-3000
only.
If the existing firmware version is earlier
than v1.07, please repeat this firmware
upgrade procedure twice.
For firmware versions earlier than v1.07
(v1.00~v1.06), please upgrade both the DSO
firmware and the OS kernel (follow the operation
steps 1 to 10). This means that you need to do the
same upgrade procedure
twice .
If upgrading the firmware from V1.07 to v1.08 or
later, only update the firmware. The kernel
upgrade is not required (follow operation steps 1
to 6).