SilentKnight VisorAlarm ARLY Interface - Manual (Page 49)

VISOR ALARM – ARLY Configuration
II - 44
Doc.DM359-I
Rev.2.0
ARLY-1 Cfg> MIP 101234 LOCAL-EVENTS-ZONE 015
ARLY-1 Cfg>
s) MIP accnt MNT-IP-ADDRESS
This parameter defines the address of the maintenance receiver that must receive the “Maintenance
Signals”. “Maintenance signals” are those “System Trouble” signals or “Communication Trouble”
signals of a mIP/IPDACT device that must be sent to an alternate site in order to perform an
specialized management of the problems.
Syntax:
ARLY-1 Cfg>MIP accnt mnt-ip-address ip-address
IP-address IP Address of the Maintenance VisorALARM.
Example:
ARLY-1 Cfg>MIP 77889900 MNT-IP-ADDRESS 80.16.90.104
ARLY-1 Cfg>
To return to the default configuration for this parameter, use the following command.
ARLY-1 Cfg>NO MIP accnt MNT-IP-ADDRESS ip-address
t) MIP accnt MNT-PASSWORD
This parameter is the encryption keyword for the Maintenance VisorALARM messages. This
keyword can depend on the mIP/IPDACT account number as with any other password.
Syntax:
ARLY-1 Cfg>MIP accnt MNT-PASSWORD password
Password Password of up to 16 hexadecimal digits (0 to 9, A, B, C, D, E and F).
Example:
ARLY-1 Cfg> MIP 77889900 MNT-PASSWORD 12XYZ00BZ
ARLY-1 Cfg>
To return to the default configuration for this parameter, use the following command.
ARLY-1 Cfg>NO MIP accnt MNT-PASSWORD password
u) MIP accnt LOCAL-IP-PARAMETERS
Not available
v) MIP accnt PSTN-ACTION
Not available.
w) MIP accnt SUBSCRIBER-TELEPHONE
This parameter defines is the Alarm Panel Phone Number.