SilentKnight VisorAlarm ARLY Interface - Manual (Page 26)

VISOR ALARM – ARLY Configuration
II - 21
Doc.DM359-I
Rev.2.0
n) CFG-PATTERN n CALLBACK-PHONE 1
Configures the telephone number the control panel uses to execute bi-directional operations in
callback mode.
Syntax:
ARLY-1 Cfg>CFG-PATTERN n CALLBACK-PHONE telephone_number
telephone_number Telephone number dialed by the control panel to execute bi-
directional in call-back mode. Admits values between 1 and 9.
Example:
ARLY-1 Cfg>CFG-PATTERN 10 CALLBACK-PHONE 918076123
ARLY-1
To return to the default configuration for this parameter, use the following command:
ARLY-1 Cfg>NO CFG-PATTERN n CALLBACK-PHONE telephone_number
o) CFG-PATTERN n BCK-RECEIVER-IP
Configures the backup address the mIP/IPDACT uses as a second option in cases where
communications fail with the main VisorALARM
Syntax:
ARLY-1 Cfg> CFG-PATTERN n BCK-RECEIVER-IP ip_address
ip_address Backup VisorALARM IP address.
Example:
ARLY-1 Cfg> CFG-PATTERN n BCK-RECEIVER-IP 80.26.96.183
ARLY-1 Cfg>
To return to the default configuration for this parameter, use the following command.
ARLY-1 Cfg>NO CFG-PATTERN n KEEP-ALIVE-TIMER time
p) CFG-PATTERN n BCK-KEEP-ALIVE-TIMER
This parameter is the same as the keep-alive-timer however it is applied to the backup
VisorALARM. In the same way it must fulfill that:
T
keep-alive interval
≥ T
interval between retries
x N
send retries
Syntax:
ARLY-1 Cfg>CFG-PATTERN n BCK-KEEP-ALIVE-RETRIES-TIMER time
time Time in seconds between keep-alive frames. Admits values between 0
and 90.
Example:
1 Not available in US versions