SilentKnight VisorAlarm ARLY Interface User Manual
Page 46
VISOR ALARM – ARLY Configuration
II - 41
Doc.DM359-I
Rev.2.0
ARLY-1 Cfg>NO MIP accnt KEEP-ALIVE-RETRIES-TIMER time
k) MIP accnt PHONE-LENGTH
In the mIP/IPDACT this configures the number of digits making up a telephone number. This number
depends on the country’s dialing plan, the existence of switchboards etc. The mIP/IPDACT uses this
to find out how many digits it should expect from the control panel before processing the call.
Syntax:
ARLY-1 Cfg>MIP accnt PHONE-LENGTH length
length
Number of digits making up a telephone number. Admits values
between 1 and 15.
Example:
ARLY-1 Cfg>MIP 101234 PHONE-LENGTH 9
ARLY-1 Cfg>
To return to the default configuration for this parameter, use the following command:
ARLY-1 Cfg>NO MIP accnt PHONE-LENGTH length
l) MIP accnt ALARM-TX-RETRIES
Configures the number of times that the mIP/IPDACT transmits an alarm to the VisorALARM to
ensure that this receives the alarm and sends confirmation to the mIP/IPDACT. Connection with is
considered lost once this number of retries has been completed and permits the control panel to send
the alarm over the telephone line.
Syntax:
ARLY-1 Cfg>MIP accnt ALARM-TX-RETRIES number
number
Number of times the alarm is sent to the VisorALARM. Admits
values between 5 and 10.
Example:
ARLY-1 Cfg>MIP 101234 ALARM-TX-RETRIES 5
ARLY-1 Cfg>
To return to the default configuration for this parameter, use the following command:
ARLY-1 Cfg>NO MIP accnt ALARM-TX-RETRIES number
m) MIP accnt CALLBACK-PHONE
2
Configures the telephone number used by the control panel to execute bi-directional operations in call-
back mode.
2
Not available in US versions