SilentKnight VisorAlarm ARLY Interface - Manual (Page 31)

VISOR ALARM – ARLY Configuration
II - 26
Doc.DM359-I
Rev.2.0
ARLY-1 Cfg>list ?
all List all config params
alarm-receiver Alarm Receiver emulation params
backup-alarm-receiver Parameters for network backup
cfg-pattern Config pattern params
io-conf General purpose I/O Config parameters
monitor-ip-addr Internet IP addr to check availavility
mip MIP configuration params
priority-standard Priority standard used to display signals
serial-parameters Asyncronous serial line params
sms SMS receiving params
supervision MIP supervision params
user-defined-events Codes for user defined events
printable-events Events to be sent to a serial printer device
a) LIST ALL
Lists all the ARLY interface configuration.
Syntax:
ARLY-1 Cfg>list all
Example:
ARLY-1 Cfg>list all
Serial parameters
-----------------
Link speed.: 9600 (bit/sec)
Data bits..: 8
Stop bits..: 1
Parity.....: none
Alarm Receiver Parameters:
-------------------------
Protocol: ademco-685
Receiver ID: 1, Line ID: 0
Link test timer: 120
Receiver specific parameters:
Blocking: NONE
Backup Alarm Receiver Parameters:
--------------------------------
CRA type: MAIN.
Synchronization Port: 35001.
MIP Supervision:
---------------
Supervision Port: 1234.
Communication Supervision:
-------------------------
Monitor IP address: None
MIP Configuration Patterns:
--------------------------
Config Pattern ID : 1
Instalator Password : 1111
Alarm Receiver IP address : 81.23.69.152
Backup Alarm Receiver IP address : 81.23.70.54
Maintenance Receiver IP address : 81.23.56.89
Maintenance Alarm Password : 2AB4
Alarm Receiver UDP Port : 1222
MIP Console Password : 1111
MIP Password : 220771B
Alarm Receiver Password : 220771B
Keep-alives.
Timer : 21
Retries : 3
Retries Timer : 5
Backup Receiver Keep-alives.