SilentKnight VisorAlarm ARLY Interface - Manual (Page 44)

VISOR ALARM – ARLY Configuration
II - 39
Doc.DM359-I
Rev.2.0
ARLY-1 Cfg>NO MIP accnt USR-PASSWORD password
f) MIP accnt MIP-PASSWORD
Configures the password with which the mIP/IPDACT encrypts its messages.
Syntax:
ARLY-1 Cfg>MIP accnt MIP-PASSWORD password
password Password of up to 16 hexadecimal digits (0 to 9, A, B, C, D, E and F).
Example:
ARLY-1 Cfg>MIP 101234 MIP-PASSWORD 12FED00B3
ARLY-1 Cfg>
To return to the default configuration for this parameter, use the following command:
ARLY-1 Cfg>NO MIP accnt MIP-PASSWORD password
g) MIP accnt RECEIVER-PASSWORD
Configures the password with which the VisorALARM encrypts its messages.
Syntax:
ARLY-1 Cfg>MIP accnt RECEIVER-PASSWORD password
password Password of up to 16 hexadecimal digits (0 to 9, A, B, C, D, E and F).
Example:
ARLY-1 Cfg>MIP 101234 RECEIVER-PASSWORD 12FED00B3
ARLY-1 Cfg>
To return to the default configuration for this parameter, use the following command:
ARLY-1 Cfg>NO MIP accnt RECEIVER-PASSWORD password
h) MIP accnt KEEP-ALIVE-TIMER
Configures the time interval used by the mIP/IPDACT to check connectivity with the VisorALARM.
Each time this timer times out, a keep-alive frame is sent to notify the VisorALARM that the
connection is active and waits for its response.
Syntax:
ARLY-1 Cfg>MIP accnt KEEP-ALIVE-TIMER time
time Time in seconds between keep-alive frames. Admits values between 0
and 90.
Example:
ARLY-1 Cfg>MIP 101234 KEEP-ALIVE-TIMER 30
ARLY-1 Cfg>