Triton 8100 User/Installation Manual - Manual (Page 96)

M
ODEL
8100 U
SER
/ I
NSTALLATION
M
ANUAL
78
I
NTRODUCTION
This section of the manual covers preventive and corrective maintenance pro-
cedures appropriate for user personnel. The following areas are covered:
1. R
EPLENISHING
R
ECEIPT
P
APER
. Describes how to replace a spent receipt
paper roll.
2. C
LEANING THE
E
NCLOSURE
. The proper way to clean the ATM housing.
3. C
ARD
R
EADER
C
LEANING
. The recommended card reader cleaning technique.
*Important*
Only qualified service personnel are authorized to repair or
service the terminal. Should a malfunction occur, DO NOT at-
tempt to service the unit yourself! Contact your Triton certified
service provider!
R
EPLENISHING THE
R
ECEIPT
P
APER
NOTE: This operation must be completed with the AC power applied to the
ATM.
1. Open the top of the ATM by unlocking the top enclosure and pulling the
hinged door forward.
2. If paper remains on the roll, cut or tear the paper between the roll and the
printer.
** Caution **
DO NOT pull receipt paper back-
wards through the printer! This
may leave paper fragments that can
cause paper jams.
3. Use the receipt printer feed button (as shown in Figure 6-1) to feed the
paper through the paper path until all paper comes out the front of the
printer.
4. Remove the paper and spool from the paper bracket .