Triton 8100 User/Installation Manual - Manual (Page 80)

62
M
ODEL
8100 U
SER
/ I
NSTALLATION
M
ANUAL
N
ETWORK
S
ETTINGS
D
ESCRIPTION
:
The T
ERMINAL
IP A
DDRESS
identifies
the ATM as the source of the data
packet, and is used by the host server
to return acknowledgements,
transaction approvals, or other data to
the ATM.
Note: This Address is auto-detected
from the wireless modem hardware. You
will not be able to change these
parameters.
The L
ISTENING
P
ORT
and TCP/IP
T
IMEOUT
parameters are provided by
the host network.
The L
ISTENING
P
ORT
value identifies
the data being sent to that specific
machine. This value consists of five (5)
digits or less. Note: Default value is
1000.
The TCP/IP T
IMEOUT
is defaulted to
120 seconds, but may be increased or
decreased depending on response time.
Maximum timeout value is 999 seconds.
Follow the steps below to initially enter
or change the L
ISTENING
P
ORT
:
$
Select to blank the
current entry, if necessary.
$
Enter the Port Number. Select
to save the entry, or
to discard the changes.
Follow the steps above to enter or
change the TCP/IP T
IMEOUT
.