Triton 8100 User/Installation Manual - Manual (Page 148)

B-4
M
ODEL
8100 U
SER
/ I
NSTALLATION
M
ANUAL
3. Turn change key to the Left until it stops (approximately one-quarter turn).
With the change key in this position, set the new combination as follows:
Note: Never select a number from 0 to 20 (the forbidden zone) as the last
number of the combination.
4. Using the ‘Change Index’, turn the dial to the Left stopping when the first
number of the new combination aligns with the ‘Change Index’, the Fourth
time.
5. Turn dial to the Right, stopping when the second number is aligned with
the ‘Change Index’, the Third time.
6. Turn the dial to the Left, stopping when the third number is aligned with the
‘Change Index’, the Second time. Holding the dial in this position, turn the
change key back to the Right and remove it. (See Figure 1.) The new
combination you have chosen is now set in the lock,
Figure 1
*Important*
Before closing the vault door, try the new combi-
nation several times using the ‘Opening Index’.