Triton 8100 User/Installation Manual - Manual (Page 66)

48
M
ODEL
8100 U
SER
/ I
NSTALLATION
M
ANUAL
C
OMMUNICATION
N
UMBERS
A
CCESS
I
NSTRUCTIONS
:
1. From the M
AIN
M
ENU
screen, se-
lect C
ONFIGURE
P
ROCESSORS
.
2. From the C
ONFIGURE
P
ROCES
-
SORS
screen, select option (1),
(2), (3), or (4).
3. From the C
ONFIGURATION
F
OR
:
menu screen, select option (4).
D
ESCRIPTION
:
The C
OMMUNICATION
Numbers function allows entry of the host processors
primary and backup (if needed) phone numbers or the Host TCP/IP Addresses if
running TCP/IP communications type.
The H
OST
TCP/IP A
DDRESSES
are provided by your host Network Administrator
. The first part of the address consists of a sequence of four groups of numbers.
Each group can be up to three digits long, and each group is separated by a
period (dot character), as in this example: 123.3.01.99 The second part of the
address is a P
ORT
N
UMBER
, consisting of five (5) digits or less, separated from
the first part by a comma (‘,’) character, as in this example: 123.3.01.99,23353.
Follow these steps to initially enter or change the P
RIMARY
H
OST
TCP/IP A
DDRESS
:
$
Select which host address you want to enter/change (Primary/Backup).
$
Enter the first group of numbers in the IP Address using the main keypad
keys.
$
Enter a ‘dot’ character by pressing the key, then the <0> key
Twice to select the period’, then the key to lock it in.
$
Repeat Steps 2 and 3 for the second and third group of numbers in the IP
Address.
$
Enter the fourth group of numbers in the IP Address.
$
Enter the comma (“,”) character by pressing the key, then the
<0> key Once to select the comma. Press the key to
lock it in.
$
Enter the P
ORT
N
UMBER
. Select to save the Host /IP Address entry,
or to discard the changes. Repeat steps for B
ACKUP
H
OST
TCP/IP
A
DDRESS
entry.