Triton 8100 User/Installation Manual - Manual (Page 83)

65
M
ANAGEMENT
F
UNCTIONS
T
RITON
C
ONNECT
A
LARM
N
UMBERS
(A
DDRESS
)
D
ESCRIPTION
:
The T
RITON
C
ONNECT
A
LARM
N
UMBERS
are provided by the Triton Connect
Administrator. If you are using TCP/
IP as your communication type, you
will need to enter Alarm TCP/IP
Addresses. The first part of the address
consists of a sequence of four groups
of numbers. Each group can be up to
three digits long, and each group is
separated by a period (dot character),
as in this example: 123.3.01.99 The
second part of the address is a Port
Number, consisting of four (4) digits or
less, separated from the first part by a
comma (“,”) character, as in this
example: 123.3.01.99,9043. (No
Spaces!)
Follow these steps to initially enter or
change the T
RITON
C
ONNECT
P
RIMARY
A
LARM
N
UMBERS
(A
DDRESS
):
$
Select to blank the current
entry, if necessary.
$
Enter the first group of numbers in
the TCP/IP Address using the main
keypad keys.
$
Enter a ‘dot’ character by pressing the key, then the <0> key Twice
to select the period’, then the key to lock it in.
$
Repeat Steps 2 and 3 for the second and third group of numbers in the TCP/IP
Address.
$
Enter the fourth group of numbers in the TCP/IP Address.
$
Enter the comma (“,”) character by pressing the key, then the <0>
key Once to select the comma. Press the key to lock it in.
$
Enter the Port Number. Select to save the Primary Alarm TCP/IP Address
entry or to discard the changes. Repeat steps for B
ACKUP
A
LARM
TCP/IP A
DDRESS
, if needed.