Triton 8100 User/Installation Manual - Manual (Page 28)

10
M
ODEL
8100 U
SER
/ I
NSTALLATION
M
ANUAL
Figure 2-2. Function keys.
F1
F2
F3
F4
F5
F6
F7
F8
CTRL
F
UNCTION
K
EYPADS
The primary menu navigation keys, called Function keys, are arranged in two
four-key groups, one group on either side of the LCD screen. A Function key is
only active when a function or menu option name is displayed (if the display is
“grayed out”, that option is not available). The Function keys are designated F1
through F8, as shown in Figure 2-2.
The entry of numeric characters via the main keypad is straightforward: simply
press the desired key. However, in certain Management Function screens it may
be necessary to enter alphabetic characters, a procedure that requires a little
more explanation. On such screens, a flashing cursor will be evident on the
display, representing the location where the next character you enter will be
displayed. To enter a letter or punctuation mark, you will first press the
key (the blank key in the lower right-hand corner of the keypad), and then you
will press the number that has the letter or other character you want.
M
AIN
K
EYPAD