Triton 8100 User/Installation Manual - Manual (Page 36)

18
M
ODEL
8100 U
SER
/ I
NSTALLATION
M
ANUAL
To access Management Functions, enter an appropriate password in the dialog
box that appears when the Management Functions option is selected. The pass-
word can consist of up to 12 digits. Press the button to accept the entry
or to exit. When a valid password is entered, the Main menu screen
will be displayed (Figure 3-1).
I
NTRODUCTION
This section describes the Management Functions available with the ‘M
ASTER
’
password for accessing the ATM. When the Customer Welcome screen is dis-
played, you can access the Management Functions menu by following the
procedure described next.
A
CCESSING THE
M
ANAGEMENT
F
UNCTIONS
M
ENU
1. Press and hold down the key; while holding down the
key, press the <1> key. Release both keys. After a moment the top menu will
be displayed.
2. At the top menu, select M
ANAGEMENT
F
UNCTIONS
by pressing the key next
to Management Functions option.
3. Enter the user password at the password entry display.
DEFAULT PASSWORDS
The default Master password is “123456” and the default Administrative
password is “987654”.
If you use the same password for both the MASTER and ADMINISTRATION
functions, the ATM defaults to the ADMINISTRATION functions, the lowest
level options. The passwords can only be changed when the MASTER pass-
word is entered in the Management Functions, so never use the identical
password for both MASTER and ADMINISTRATION.
Cassette Service
During the initial boot procedure, the terminal will force an Error
Code 156 to ensure the user enters the Cassette Setup functions to
configure and put at least one cassette (cassette “A” for single
cassette dispensers) In Service.