Brocade Monitoring and Alerting Policy Suite Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 98)

The following example shows all the thresholds for the ALL_D_PORTS group in
the policy named “dflt_conservative_policy”.
switch:admin> mapspolicy --show dflt_conservative_policy | grep ALL_D_PORTS
defALL_D_PORTSCRC_3 RASLOG,SNMP,EMAIL ALL_D_PORTS(CRC/MIN>3)
defALL_D_PORTSPE_3 RASLOG,SNMP,EMAIL ALL_D_PORTS(PE/MIN>3)
defALL_D_PORTSITW_3 RASLOG,SNMP,EMAIL ALL_D_PORTS(ITW/MIN>3)
defALL_D_PORTSLF_3 RASLOG,SNMP,EMAIL ALL_D_PORTS(LF/MIN>3)
defALL_D_PORTSLOSS_SYNC_3 RASLOG,SNMP,EMAIL ALL_D_PORTS(LOSS_SYNC/MIN>3)
defALL_D_PORTSCRC_H90 RASLOG,SNMP,EMAIL ALL_D_PORTS(CRC/HOUR>90)
defALL_D_PORTSPE_H90 RASLOG,SNMP,EMAIL ALL_D_PORTS(PE/HOUR>90)
defALL_D_PORTSITW_H90 RASLOG,SNMP,EMAIL ALL_D_PORTS(ITW/HOUR>90)
defALL_D_PORTSLF_H90 RASLOG,SNMP,EMAIL ALL_D_PORTS(LF/HOUR>90)
defALL_D_PORTSLOSS_SYNC_H90 RASLOG,SNMP,EMAIL ALL_D_PORTS(LOSS_SYNC/HOUR>90)
defALL_D_PORTSCRC_D1500 RASLOG,SNMP,EMAIL ALL_D_PORTS(CRC/DAY>1500)
defALL_D_PORTSPE_D1500 RASLOG,SNMP,EMAIL ALL_D_PORTS(PE/DAY>1500)
defALL_D_PORTSITW_D1500 RASLOG,SNMP,EMAIL ALL_D_PORTS(ITW/DAY>1500)
defALL_D_PORTSLF_D1500 RASLOG,SNMP,EMAIL ALL_D_PORTS(LF/DAY>1500)
defALL_D_PORTSLOSS_SYNC_D1500 RASLOG,SNMP,EMAIL ALL_D_PORTS(LOSS_SYNC/
DAY>1500)
The first column is the name of the statistic being monitored. The second is the
actions for that statistic that will be triggered if the threshold is passed. The third
column lists the group being monitored, followed by the metric, followed by the
threshold. So “defALL_D_PORTSCRC_3 RASLOG,SNMP,EMAIL
ALL_D_PORTS(CRC/MIN>3)” :
• Is named “defALL_D_PORTSCRC_3”
• Has the actions RASLog, SNMP, and email
• Applies to all D_Ports
• Measures CRC errors per minute. The threshold to trigger the listed actions
is “more than three errors in a minute”.
Fabric monitoring thresholds
The following table lists the default monitoring thresholds for fabric criteria used by the MAPS. All
thresholds are measured per minute and actions are triggered when the reported value is greater than
the threshold value.
Default fabric monitoring thresholds TABLE 22
Monitoring statistic
MAPS thresholds and actions per policy
Actions Aggressive Moderate Conservative
Domain ID change 1 1 1 RASLOG, SNMP, EMAIL
Fabric logins 4 6 8 RASLOG, SNMP, EMAIL
Fabric reconfigurations 1 2 4 RASLOG, SNMP, EMAIL
E_Ports down 1 2 4 RASLOG, SNMP, EMAIL
Segmentation changes 1 2 4 RASLOG, SNMP, EMAIL
Zone changes 2 5 10 RASLOG, SNMP, EMAIL
Fabric monitoring thresholds
98 Monitoring and Alerting Policy Suite Administrator's Guide
53-1003147-01