Brocade Monitoring and Alerting Policy Suite Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 37)

Predefined MAPS groups (Continued) TABLE 16
Predefined group name Object type Description
ALL_TUNNELS Tunnel All FCIP tunnels in the switch. This is supported on the
Brocade 7840 switch only.
ALL_SFP SFP All small form-factor pluggable (SFP) transceivers.
ALL_10GSWL_SFP SFP All 10-Gbps Short Wavelength (SWL) SFP transceivers on FC
Ports in the logical switch.
ALL_10GLWL_SFP SFP All 10-Gbps Long Wavelength (LWL) SFP transceivers on FC
Ports in the logical switch.
ALL_16GSWL_SFP SFP All 16-Gbps SWL SFP transceivers in the logical switch.
ALL_16GLWL_SFP SFP All 16-Gbps LWL SFP transceivers in the logical switch.
ALL_OTHER_SFP SFP All SFP transceivers that do not belong to one of the following
groups:
• ALL_10GSWL_SFP
• ALL_10GLWL_SFP
• ALL_16GSWL_SFP
• ALL_16GLWL_SFP
• ALL_QSFP
ALL_QSFP SFP All quad small form-factor pluggable (QSFP) transceivers in
the logical switch.
ALL_SLOTS Slot All slots present in the chassis.
ALL_SW_BLADES Blade All port and application blades in the chassis.
ALL_CORE_BLADES Blade All core blades in the chassis.
ALL_CIRCUITS Circuit All Fibre Channel over Internet Protocol (FCIP) circuits in the
logical switch.
ALL_FAN Fan All fans in the chassis.
ALL_FLASH Flash The flash memory card in the chassis.
ALL_PS Power Supply All power supplies in the chassis.
ALL_TS Temperature
Sensor All temperature sensors in the chassis.
ALL_WWN WWN All WWN cards in the chassis.
ALL_TUNNEL_HIGH_QOS QoS These are available for Brocade 7840 devices only.
QoS monitoring based on pre-defined QoS priorities is done
only at the tunnel level, and the groups correspond to the
tunnels on Brocade 7840 devices. Attributes monitored for
QoS are throughput and lost packets.
ALL_TUNNEL_MED_QOS QoS
ALL_TUNNEL_LOW_QOS QoS
MAPS Groups, Policies, Rules, and Actions
Monitoring and Alerting Policy Suite Administrator's Guide 37
53-1003147-01