Brocade Monitoring and Alerting Policy Suite Administrators Guide (Supporting Fabric OS v7.3.0) User Manual
Page 106
Default Port Health monitoring thresholds for Target F_Ports (Continued)
TABLE 30
Monitoring statistic
MAPS Target F_Port high/low thresholds and actions per policy
Aggressive
Moderate
Conservative
Actions
Link Reset (LR)
0/2
3/5
6/10
Low threshold: EMAIL, SNMP, RASLOG
High threshold: EMAIL, SNMP, FENCE,
DECOM
State Change
(STATE_CHG)
0/2
3/7
8/15
Low threshold: EMAIL, SNMP, RASLOG
High threshold: EMAIL, SNMP, FENCE,
DECOM
Protocol Errors (PE)
0/2
3/4
5/6
Low threshold: EMAIL, SNMP, RASLOG
High threshold: EMAIL, SNMP, FENCE,
DECOM
Loss of signal
(LOSS_SIGNAL)
0
3
5
EMAIL, SNMP, RASLOG
Link Failure (LF)
0
3
5
EMAIL, SNMP, RASLOG
Sync Loss
(LOSS_SYNC)
0
3
5
EMAIL, SNMP, RASLOG
RXP percentage
60
75
90
EMAIL, SNMP, RASLOG
TXP percentage
60
75
90
EMAIL, SNMP, RASLOG
Utilization percentage
60
75
90
EMAIL, SNMP, RASLOG
If an F_Port cannot be identified as either a host or a target, the thresholds for it are the same as those
for Host F_Ports.
Non-F_Port default Port Health monitoring thresholds
The following table lists the default Port Health monitoring thresholds for non-F_Ports.
Default Port Health monitoring thresholds for non-F_Ports
TABLE 31
Monitoring statistic
MAPS non-F_Port high/low thresholds and actions per policy
Aggressive
Moderate
Conservative
Actions
C3 Time out
(C3TX_TO)
N/A
N/A
N/A
N/A
CRC Errors (CRC)
0/2
10/20
21/40
Low threshold: EMAIL, SNMP,
RASLOG
High threshold: EMAIL, SNMP,
FENCE, DECOM
MAPS Threshold Values
106
Monitoring and Alerting Policy Suite Administrator's Guide
53-1003147-01