Predefined policies, Default maps policy rules, User-defined policies – Brocade Monitoring and Alerting Policy Suite Administrators Guide (Supporting Fabric OS v7.3.0) User Manual
Page 44: Predefined policies user-defined policies, Activation. refer to, Refer to
defALL_D_PORTSLOSS_SYNC_3 RASLOG,SNMP,EMAIL ALL_D_PORTS(LOSS_SYNC/MIN>3)
defALL_D_PORTSCRC_H90 RASLOG,SNMP,EMAIL ALL_D_PORTS(CRC/HOUR>90)
defALL_D_PORTSPE_H90 RASLOG,SNMP,EMAIL ALL_D_PORTS(PE/HOUR>90)
defALL_D_PORTSITW_H90 RASLOG,SNMP,EMAIL ALL_D_PORTS(ITW/HOUR>90)
defALL_D_PORTSLF_H90 RASLOG,SNMP,EMAIL ALL_D_PORTS(LF/HOUR>90)
defALL_D_PORTSLOSS_SYNC_H90 RASLOG,SNMP,EMAIL ALL_D_PORTS(LOSS_SYNC/HOUR>90)
defALL_D_PORTSCRC_D1500 RASLOG,SNMP,EMAIL ALL_D_PORTS(CRC/DAY>1500)
defALL_D_PORTSPE_D1500 RASLOG,SNMP,EMAIL ALL_D_PORTS(PE/DAY>1500)
defALL_D_PORTSITW_D1500 RASLOG,SNMP,EMAIL ALL_D_PORTS(ITW/DAY>1500)
defALL_D_PORTSLF_D1500 RASLOG,SNMP,EMAIL ALL_D_PORTS(LF/DAY>1500)
defALL_D_PORTSLOSS_SYNC_D1500 RASLOG,SNMP,EMAIL ALL_D_PORTS(LOSS_SYNC/DAY>1500)
Predefined policies
MAPS provides three predefined policies that you can neither modify or delete.
• dflt_conservative_policy
This policy contains rules with more lenient thresholds that allow a buffer and do not immediately
trigger actions. Use this policy in environments where the elements are resilient and can
accommodate errors.
• dflt_moderate_policy
This policy contains rules with thresholds values between the aggressive and conservative policies.
• dflt_aggressive_policy
This policy contains rules with very strict thresholds. Use this policy if you need a pristine fabric (for
example, FICON fabrics).
For System z/FICON environments, Brocade recommends that you start with the Aggressive policy.
For Open Systems environments and other environments, Brocade recommends that you start with
the Moderate policy.
Although you cannot modify these preconfigured policies, you can create a policy based on these
policies that you can modify. For more information, refer to the links below.
•
on page 49
•
on page 47
•
Default MAPS policy rules
Each of the three default policies has its own rules.
To view the rules for a policy, enter mapsPolicy --show followed by the name of the policy.
User-defined policies
MAPS allows you to define your own policies. You can create a policy and add rules to it, or you can
clone one of the default policies and modify the cloned policy.
on page 45 for information on working with user-defined
policies.
Predefined policies
44
Monitoring and Alerting Policy Suite Administrator's Guide
53-1003147-01