Viewing a summary switch status report – Brocade Monitoring and Alerting Policy Suite Administrators Guide (Supporting Fabric OS v7.3.0) User Manual
Page 79
1. Connect to the switch and log in using an account with admin permissions.
2. Enter mapsDb --show followed by the scope parameter: all, history, or details. Entering details
allows you to specify either a specific day or a specific hour of the current day.
The following example shows a typical result of entering mapsDb --show all.
switch:admin> mapsdb --show all
1 Dashboard Information:
=======================
DB start time: Sun Mar 30 20:46:59 2014
Active policy: dflt_moderate_policy
Configured Notifications: SW_CRITICAL,SW_MARGINAL
Fenced Ports : None
Decommissioned Ports : None
2 Switch Health Report:
=======================
Current Switch Policy Status: HEALTHY
3.1 Summary Report:
===================
Category |Today |Last 7 days |
--------------------------------------------------------------------------------
Port Health |No Errors |No Errors |
Fru Health |In operating range |In operating range |
Security Violations |No Errors |No Errors |
Fabric State Changes |No Errors |No Errors |
Switch Resource |In operating range |Out of operating range |
Traffic Performance |In operating range |In operating range |
FCIP Health |Not applicable |Not applicable |
Fabric Performance Impact|Out of operating range |In operating range |
3.2 Rules Affecting Health:
===========================
Category(Rule Count)|RepeatCount|Rule Name |Execution Time |Object |Triggered Value(Units)|
---------------------------------------------------------------------------------------------------
Switch Resource (1) |1 |defCHASSISCPU_80|03/30/14 20:50:00|Chassis|99.00 % |
4 History Data:
===============
Stats(Units) Current --/--/-- --/--/-- --/--/-- --/--/-- --/--/-- --/--/--
Port(val)
---------------------------------------------------------------------------------------------
CRC(CRCs) 0(>9999) - - - - - -
1(876) - - - - - -
ITW(ITWs) - - - - - - -
LOSS_SYNC(SyncLoss) - - - - - - -
LF - - - - - - -
LOSS_SIGNAL(LOS) - - - - - - -
PE(Errors) - - - - - - -
STATE_CHG - - - - - - -
LR - - - - - - -
C3TXTO(Timeouts) - - - - - - -
RX(%) - - - - - - -
TX(%) - - - - - - -
UTIL(%) - - - - - - -
BN_SECS(Seconds) - - - - - - -
on page 25 for explanations of the
categories listed in the dashboard output.
Viewing a summary switch status report
A summary view provides health status at a high level, and includes enough information for you to
investigate further if necessary.
To view a summary switch status report, complete the following steps.
Viewing a summary switch status report
Monitoring and Alerting Policy Suite Administrator's Guide
79
53-1003147-01