Brocade Monitoring and Alerting Policy Suite Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 70)

Using the mapsDb --show command shows any error or rule violation during
diagnostics tests on a D_Port.
switch:admin> mapsdb --show
1 Dashboard Information:
=======================
DB start time: Wed Mar 26 10:02:38 2014
Active policy: dflt_moderate_policy
Configured Notifications: SW_CRITICAL,SW_MARGINAL
Fenced Ports : None
Decommissioned Ports : None
2 Switch Health Report:
=======================
Current Switch Policy Status: MARGINAL
Contributing Factors:
---------------------
*BAD_PWR (MARGINAL).
3.1 Summary Report:
===================
Category |Today |Last 7 days |
-------------------------------------------------------------------------
Port Health |Out of operating range |In operating range |
Fru Health |In operating range |In operating range |
Security Violations |No Errors |No Errors |
Fabric State Changes |Out of operating range |In operating range |
Switch Resource |In operating range |In operating range |
Traffic Performance |In operating range |In operating range |
FCIP Health |Not applicable |Not applicable |
Fabric Performance Impact|In operating range |In operating range |
3.2 Rules Affecting Health:
===========================
Category(Rule Count)|RptCount|Rule Name |Execution Time |Object |Triggered Value(Units)|
----------------------------------------------------------------------------------------------------
Port Health(5) |1 |defALL_D_PORTSPE_1 |05/07/14 08:43:32|Port 20|300 Errors |
|4 |defNON_E_F_PORTSLF_0|05/07/14 08:42:56|Port 7 |6 |
| | | |Port 7 |6 |
| | | |Port 7 |6 |
| | | |Port 7 |7 |
You can also run the portdporttest --show port_number command to see
details of an individual port. The following example shows the result of running
this against port 28.
switch:admin> portdporttest --show 28
D-Port Information:
===================
Port: 28
Remote WWNN: 10:00:00:05:1e:e5:e4:00
Remote port: 164
Mode: Manual
Start time: Thu Nov 7 13:43:26 2013
End time: Thu Nov 7 13:53:43 2013
Status: PASSED*
Refer to the Fabric OS Command Reference for additional information on these
commands.
Port Monitoring Using MAPS
70 Monitoring and Alerting Policy Suite Administrator's Guide
53-1003147-01