Brocade Monitoring and Alerting Policy Suite Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 36)

logicalGroup --show fpm1 for the active Flow Vision flow “fpm1” that has been imported into, and
being monitored through, MAPS.
switch:admin> logicalgroup -show fpm1
-------------------------------------------------------------------------------------
Group Name |Predefined |Type |Member Count |Members
-------------------------------------------------------------------------------------
fpm1 No Flow 1 Monitored Flow
The following example shows the output of logicalGroup --show fpm2 for the flow “fpm2” which was
imported into MAPS, but has been deleted in Flow Vision. MAPS is not monitoring this flow, but it is
maintained as a zero member group. If the flow is recreated in Flow Vision and you want to resume
monitoring this flow, you must reimport the flow using the mapsConfig --import flow_name -force
command. Refer to the Fabric OS Command Reference for more information on using mapsConfig or
logicalGroup.
switch:admin> logicalgroup --show fpm2
-------------------------------------------------------------------------------------
Group Name |Predefined |Type |Member Count |Members
-------------------------------------------------------------------------------------
fpm2 No Flow 0 Not Monitored (Stale Flow)
Predefined groups
MAPS provides several predefined groups. You cannot delete any of these groups. You can add and
remove members from the “PORTS” groups, and you can change the pre-defined threshold values for
any predefined group.
The following table lists these predefined groups organized by object type.
Predefined MAPS groups TABLE 16
Predefined group name Object type Description
ALL_PORTS FC Port All ports in the logical switch.
ALL_D_PORTS FC Port All D_Ports in the logical switch.
ALL_E_PORTS FC Port All E_Ports and EX_Ports in the logical switch. This includes
all the ports in E_Port and EX_Port trunks as well.
ALL_F_PORTS FC Port All F_Ports in the logical switch. This includes all the ports in
F_Port trunks as well.
ALL_HOST_PORTS FC Port All ports in the logical switch connected to hosts. MAPS
automatically detects if a device connected on this port is a
server device and adds it to this set.
ALL_TARGET_PORTS FC Port All logical switch ports connected to targets. MAPS
automatically detects if a device connected on this port is a
target device and adds it to this set. If the device connected to
the port is identified as both a Host and a Target device,
MAPS treats the port as a Target port.
ALL_OTHER_F_PORTS FC Port All F_Ports in the logical switch which are neither Host nor
Target ports.
NON_E_F_PORTS FC Port All ports in the logical switch which are neither E_Ports nor
F_Ports.
Predefined groups
36 Monitoring and Alerting Policy Suite Administrator's Guide
53-1003147-01