Brocade Monitoring and Alerting Policy Suite Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 113)

Default Switch Status Policy thresholds for the MAPS conservative policy TABLE 39
Monitoring
statistic MAPS thresholds (Marginal/Critical) Actions
Bad Power DCX, DCX+: -/3
DCX-4S, DCX-4S+: -/1
All Other Platforms: 1/2
SW_CRITICAL, SNMP, EMAIL
Bad Temp 1/2 Low threshold: SW_MARGINAL, SNMP, EMAIL
High threshold: SW_CRITICAL, SNMP, EMAIL
Bad Fan 1/2 Low threshold: SW_MARGINAL, SNMP, EMAIL
High threshold: SW_CRITICAL, SNMP, EMAIL
Flash Usage 90 RASLOG, SNMP, EMAIL
Marginal Ports
(percentage) 11/25 Low threshold: No Action
High threshold: SW_CRITICAL, SNMP, EMAIL
Error Ports
(percentage) 11/25 Low threshold: No Action
High threshold: SW_CRITICAL, SNMP, EMAIL
Faulty ports
(percentage) 11/25 Low threshold: No Action
High threshold: SW_CRITICAL, SNMP, EMAIL
Faulty Blade DCX, DCX+: 1/-
DCX-4S, DCX-4S+: 1/-
Low threshold: SW_MARGINAL, SNMP, EMAIL
High threshold: No Action
Faulty WWN DCX, DCX+: -/1
DCX-4S, DCX-4S+: -/1
Low threshold: No Action
High threshold: SW_CRITICAL, SNMP, EMAIL
Faulty Core DCX, DCX+: 1/2
DCX-4S, DCX-4S+: 1/2
Low threshold: SW_MARGINAL, SNMP, EMAIL
High threshold: SW_CRITICAL, SNMP, EMAIL
HA Sync DCX, DCX+, DCX-4S, DCX-4S+: sync=0 SW_MARGINAL, SNMP, EMAIL
Traffic Performance thresholds
The following table lists the default monitoring thresholds for traffic performance used by MAPS. All
thresholds are measured per minute and are triggered when they are greater than the shown value.
Traffic Performance thresholds
Monitoring and Alerting Policy Suite Administrator's Guide 113
53-1003147-01