Brocade Monitoring and Alerting Policy Suite Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 109)

SFP monitoring thresholds
These are the default SFP monitoring thresholds used by the Monitoring and Alerting Policy Suite
(MAPS).
All SFP monitoring thresholds used by MAPS are triggered when the reported value exceeds the
threshold value. For thresholds with both an upper value and a lower value, actions are triggered when
the reported value exceeds the upper threshold value or drops below the lower threshold value.
Monitoring threshold defaults for 10 Gbps and 16 Gbps SFPs
The following table lists the default thresholds for 10 Gbps and 16 Gbps SFPs.
Default SFP monitoring thresholds for 10 Gbps and 16 Gbps SFPs TABLE 34
Monitoring
statistic
MAPS thresholds and actions (all policies)
Actions
ALL_10GSWL_SFP ALL_10GLWL_
SFP
ALL_16GSWL_
SFP ALL_16GLWL_
SFP
Current
(CURRENT)
(mA) 10 95 12 70 SFP_MARGINAL,
RASLOG, SNMP,
EMAIL
Receive Power
(RXP) (μW) 1999 2230 1259 1995 SFP_MARGINAL,
RASLOG, SNMP,
EMAIL
Transmit Power
(TXP) (μW) 1999 2230 1259 1995 SFP_MARGINAL,
RASLOG, SNMP,
EMAIL
Voltage
(VOLTAGE)
(mV) 3000 to 3600 2970 to 3600 3000 to 3600 3000 to 3600 SFP_MARGINAL,
RASLOG, SNMP,
EMAIL
Temperature
(TEMP) (°C) -5 to 90 -5 to 90 -5 to 85 -5 to 90 SFP_MARGINAL,
RASLOG, SNMP,
EMAIL
Monitoring threshold defaults for QSFPs and all other SFPs
The following table lists the default thresholds for QSFPs and SFPs that are not 10 or 16 Gbps.
Default SFP monitoring thresholds for QSFPs and all other SFPs TABLE 35
Monitoring statistic
MAPS thresholds and actions (all
policies)
Actions ALL_QSFP ALL_OTHER_SFP
Current (CURRENT) (mA) 10 50 RASLOG, SNMP, EMAIL
SFP monitoring thresholds
Monitoring and Alerting Policy Suite Administrator's Guide 109
53-1003147-01