Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) User Manual
Page 67
Multi-Service IronWare QoS and Traffic Management Configuration Guide
53
53-1003037-02
Configuring QoS
3
Configuring mixed strict priority- and weight-based traffic scheduling
When configuring the mixed strict priority- and weight-based scheduling scheme, queue 5 to queue
7 are allocated to strict priority-based scheduling and queue 0 to queue 4 are allocated to
weight-based scheduling.
To configure mixed strict priority- and weight-based scheduling., enter the following command.
Brocade(config-cpu-port)# scheduler profile MIXED0 mixed 20 30 15 5 10
Syntax: [no] scheduler profile profile name mixed [queue4-weight queue3-weight queue2-weight
queue1-weight queue0-weight]
The profile name parameter specifies the name of the mixed scheduler.
The mixed keyword defines the mixed scheduler.
The queue4-weight parameter defines the value for queue 4 in calculating the allocated bandwidth
of queue 4.
The queue3-weight parameter defines the value for queue 3 in calculating the allocated bandwidth
of queue 3.
The queue2-weight parameter defines the value for queue 2 in calculating the allocated bandwidth
of queue 2.
The queue1-weight parameter defines the value for queue 1 in calculating the allocated bandwidth
of queue 1.
The queue0-weight parameter defines the value for queue 0 in calculating the allocated bandwidth
of queue 0.
The no option is used to return to the default traffic scheduler.