beautypg.com

Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) User Manual

Page 159

background image

Multi-Service IronWare QoS and Traffic Management Configuration Guide

145

53-1003037-02

Traffic manager statistics display

4

Displaying traffic manager statistics for IPTV multicast queue

The following command displays traffic manager statistics for the IPTV Multicast queue on an
Ethernet module.

Brocade# show tm-voq-stat src_port eth 3/21 fid 8004

Multicast Queue-Id:8207

------------------------

Priority = 0/1

EnQue Pkt Count 8496

EnQue Bytes Count 11758464

DeQue Pkt Count 7743

DeQue Bytes Count 0

Total Discard Pkt Count 0

Total Discard Bytes Count 0

Oldest Discard Pkt Count 0

Oldest Discard Bytes Count 0

Current Queue Depth 0

Maximum Queue Depth since Last read 0

Syntax: show tm-voq-stat src_port eth slot/port fid fid-id

The eth slot/port variable displays TM statistics for an individual port.

The fid fid-id variable displays TM statistics for a specified fid.

Table 37

describes the output parameters of the show tm-voq-stat src_port eth command.

TABLE 37

Output parameters of the show tm-voq-stat src_port eth 3/21 fid 8004

command

Field

Description

Multicast Queue-Id

Shows the IPTV multicast queue identifier.

EnQue Pkt Count

Shows the count of all packets entering ingress queues on this traffic manager.

EnQue Bytes Count

Shows the count of all bytes entering ingress queues on this traffic manager.

DeQue Pkt Count

Shows the count of all packets dequeued from ingress queues and forwarded on this
traffic manager.

DeQue Bytes Count

Shows the count of all bytes dequeued from ingress queues and forwarded on this
traffic manager.

Total Discard Pkt Count

Shows the count of all packets failing to enter ingress queues on this traffic manager.
This may be due to:

The queue reaching its maximum depth, WRED, or other reasons.

The network processor deciding to drop packets for reasons including: an
unknown Layer 3 route, RPF, or segment filtering.

Total Discard Bytes
Count

Shows the count of all bytes failing to enter ingress queues on this traffic manager.
This may be due to:

The queue reaching its maximum depth, WRED, or other reasons.

The network processor deciding to drop packets for reasons including: an
unknown Layer 3 route, RPF, or segment filtering.

Oldest Discard Pkt Count Shows the count of all packets entering ingress queues on this traffic manager, but

deleted afterwards due to buffer full.

Oldest Discard Bytes
Count

Shows the count of all bytes entering ingress queues on this traffic manager, but
deleted afterwards due to buffer full.