Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) - Manual (Page 163)

Multi-Service IronWare QoS and Traffic Management Configuration Guide 149
53-1003037-02
Aggregated TM VOQ statistics collection
4
Enabling aggregated TM VOQ statistics collection
The tm-voq-collection command allows you to enable and disable aggregated TM VOQ statistics
collection.
Brocade(config)# statistics
Brocade(config-statistics)# tm-voq-collection
Syntax: [no] tm-voq-collection
NOTE
If priority queues are configured with system init max-tm-queues 4, TM will queue packets based on
Table 40.
Enabling SNMP support for brcdTMDestUcastQStatTable
Aggregated TM VOQ statistics per destination physical port per priority can be retrieved via SNMP
using brcdTMDestUcastQStatTable. To enable SNMP agent support for
brcdTMDestUcastQStatTable, use the snmp-server enable mib tm-dest-qstat command. By default,
SNMP support for this table is disabled.
Brocade(config)# snmp-server enable mib tm-dest-qstat
Syntax: [no] snmp-server enable mib tm-dest-qstat
NOTE
The tm-voq-collection command must be enabled along with the snmp-server enable mib
tm-dest-qstat command to enable SNMP support for aggregated TM VOQ statistics.
Brocade(config)# statistics
Brocade(config-statistics)# tm-voq-collection
Syntax: [no] tm-voq-collection
Enabling SNMP support for brcdNPQosStatTable
NP QOS statistics can be retrieved via SNMP using brcdNPQosStatTable. To enable SNMP agent
support for brcdNPQosStatTable, use the snmp-server enable mib np-qos-stat command. By
default, SNMP support for this table is disabled.
Brocade(config)# snmp-server enable mib np-qos-stat
Syntax: [no] snmp-server enable mib np-qos-stat
TABLE 40 Queue Type
NP priority TM queue
7,6 3
5,4 2
3,2 1
1,0 0