Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) - Manual (Page 183)

Multi-Service IronWare QoS and Traffic Management Configuration Guide 169
53-1003037-02
clear tm-voq-stat max-queue-depth slot
4
clear tm-voq-stat max-queue-depth slot
Clears the summary of maximum queue depth of any TM queue.
Syntax clear tm-voq-stat max-queue-depth slot slot number
Parameters slot number The slot number specifies the decimal value of the slot of the traffic manager.
Command
Modes
Privileged EXEC mode
Usage
Guidelines
The clear tm-voq-stat max-queue-depth slot command clears the maximum queue depth of any
queue from the TM.
NOTES: When you clear the maximum queue depth statistics, you need to wait for the following
amount of time to read and update the max-queue-depth value again:
• 180 seconds for the BR-MLX-10Gx8-X, NI-MLX-10Gx8-M, NI-MLX-10Gx8-D,
BR-MLX-100Gx2-X, and 4X40 modules.
• Above 180 seconds for the 10Gx24-DM module.
Command
Output
The clear tm-voq-stat max-queue-depth slot command clears the following information:
Examples The following example clears summary of the maximum queue depth:
Brocade#clear tm-voq-stat max-queue-depth slot
History
Related
Commands
show tm-voq-stat max-queue-depth slot slot number
Output field Description
QType The queue priority.
Max Depth The maximum queue depth of any queue with Qtype in bytes.
Max Util The percentage of maximum queue utilization (max-queue-depth / max-queue-size).
Destination Port The destination port of queue that has highest max queue depth.
Release Command History
Multi-Service IronWare
R05.5c This command was introduced.