Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) - Manual (Page 164)

150 Multi-Service IronWare QoS and Traffic Management Configuration Guide
53-1003037-02
Aggregated TM VOQ statistics collection
4
NOTE
The enable-qos-statistics command must be enabled along with the snmp-server enable mib
np-qos-stat command to enable SNMP support for retrieving NP QoS statistics.
NOTE
NP QOS statistics are supported for physical ports only.
Brocade(config)# enable-qos-statistics
Syntax: [no] enable-qos-statistics
Displaying TM statistics from one queue or all queues
Use the following command to display traffic manager statistics for ethernet.
Brocade# show tm-voq-stat src_port eth 2/1 dst_port ethernet
-----ethernet 2/2 - 1/4------------------
EnQue Pkt Count 4168645330
EnQue Bytes Count 1010575722
DeQue Pkt Count 0
DeQue Bytes Count 0
Total Discard Pkt Count 2084322665
Total Discard Bytes Count 505287857
Oldest Discard Pkt Count 0
Oldest Discard Bytes Count 0
WRED Dropped Pkt Count 1594822490
WRED Dropped Bytes Count 126321962
Current Queue Depth 0
Maximum Queue Depth since Last read 0
Use the following command to display traffic manager statistics for all priorities.
Brocade# show tm-voq-stat src_port p1/1 dst_port p1/2
--------- Ports 1/1 - 1/4 ---------
Priority = 0
EnQue Pkt Count 81581531
EnQue Bytes Count 2692190523
DeQue Pkt Count 81581531
DeQue Bytes Count 2692190523
Total Discard Pkt Count 0
Total Discard Bytes Count 0
Oldest Discard Pkt Count 0
Oldest Discard Bytes Count 0
WRED Dropped Pkt Count 0
WRED Dropped Bytes Count 0
Current Queue Depth 0
Maximum Queue Depth since Last read 2310
Priority = 1
EnQue Pkt Count 0
EnQue Bytes Count 0
DeQue Pkt Count 62
DeQue Bytes Count 1302
Total Discard Pkt Count 0
Total Discard Bytes Count 0
Oldest Discard Pkt Count 0
Oldest Discard Bytes Count 0