Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) - Manual (Page 204)

190 Multi-Service IronWare QoS and Traffic Management Configuration Guide
53-1003037-02
Hierarchical QoS (HQoS) for 8x10G modules
5
Brocade(config-if-e10000-1/1)# hqos-map Logical-Port1.CustomerGrp1.Customer1
match vlan 100 isid 1000
Brocade(config-if-e10000-1/1)# hqos-map Logical-Port1.CustomerGrp1.Customer2
match vlan 200 isid 2000
Brocade(config-if-e10000-1/1)# hqos-map Logical-Port1.CustomerGrp2.Customer1
match vlan 300 isid 3000
Brocade(config-if-e10000-1/1)# hqos-map Logical-Port1.CustomerGrp2.Customer2
match vlan 400 isid 4000
Brocade(config-if-e10000-1/1)# hqos-map Logical-Port2.CustomerGrp1.Customer1
match vlan 500 isid 5000
Brocade(config-if-e10000-1/1)# hqos-map Logical-Port2.CustomerGrp1.Customer2
match vlan 600 isid 6000
Brocade(config-if-e10000-1/1)# hqos-map Logical-Port2.CustomerGrp2.Customer1
match vlan 700 isid 7000
Brocade(config-if-e10000-1/1)# hqos-map Logical-Port2.CustomerGrp2.Customer2
match vlan 800 isid 8000
Displaying HQoS information
Use the following commands to show HQoS information.
Displaying the HQoS policy
Use the show hqos policy command to display the information of the policy and its associated
flows.
Brocade# show hqos policy vlan-business
Scheduler-policy-name vlan-businessLevel level-0
Scheduler-type weighted Shaper-rate 2000000 Kbps
scheduler-flow Logical-Port1 scheduler-input 7 scheduler-policy
logical-port-type1
scheduler-flow Logical-Port2 scheduler-input 6 scheduler-policy
logical-port-type1
scheduler-flow Other-traffic scheduler-input 5 scheduler-policy other-policy
Use the show hqos policy command to display the information of all the interfaces to which this
policy is applied.
Brocade# show hqos policy vlan-business applied
Ethernet Port: 1/1
Scheduler-node Type: Root
Scheduler-node Policy Name: vlan-business
Scheduler-node Name: vlan-business
Scheduler-node ID: 0x00610000
Syntax: show hqos policy policy-name [applied]
Displaying HQoS interface information
Use the show hqos interface ethernet command to display information for the specified interface.
Brocade# show hqos interface eth 1/1
Interface Number: 0x31
HQOS State: Enabled
Scheduler Tree State: Download Finish/Active
Policy-name: vlan-business