Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) - Manual (Page 158)

144 Multi-Service IronWare QoS and Traffic Management Configuration Guide
53-1003037-02
Traffic manager statistics display
4
Displaying traffic manager statistics for the
20x1G module
The following command displays traffic manager statistics for the 20x1G module.
Syntax: show tm statistics all-counters dev_id
The dev_id variable specifies the device id that you want to display traffic manager statistics for.
Brocade#show tm statistics all-counters 0
Ingress Counters:
LBP Pkt Count: 0
QDP EnQue Pkt Count: 0
QDP EnQue Byte Count: 0
QDP DeQue Pkt Count: 0
QDP DeQue Byte Count: 0
QDP Head Delete Pkt Count: 0
QDP Head Delete Byte Count: 0
QDP Tail Delete Pkt Count: 0
QDP Tail Delete Byte Count: 0
Flow Status Message Count: 0
Transmit Data Cell Count: 0
TDM_A Pkt Count: 0
TDM_B Pkt Count: 0
Programmable Ingress Counters:
[Queue Select: 8000, Queue Mask 0x0007]
QDP EnQue Pkt Count: 0
QDP EnQue Byte Count: 0
QDP DeQue Pkt Count: 0
QDP DeQue Byte Count: 0
QDP Head Delete Pkt Count: 0
QDP Head Delete Byte Count: 0
QDP Tail Delete Pkt Count: 0
QDP Tail Delete Byte Count: 0
Flow Status Message Count: 0
Egress Counters:
EGQ EnQue Pkt Count: 0
EGQ EnQue Byte Count: 0
EGQ Discard Pkt Count: 0
EGQ Discard Byte Count: 0
EGQ Segment Error Count: 0
EGQ Fragment Error Count: 0
Port63 Error Pkt Count: 0
Pkt Header Error Pkt Count: 0
Pkt Lost Due to Buffer Full Pkt Count: 0
Reassem Err Discard Pkt Count: 0
Reassem Err Discard Fragment(32B) Count: 0
TDM_A Lost Pkt Count: 0
TDM_B Lost Pkt Count: 0
Programmable Egress Counters:
[Port Id for Enque: 0 (Disable), Port Id for Discard: 0 (Disable)]
EGQ EnQue Pkt Count: 0
EGQ EnQue Byte Count: 0
EGQ Discard Pkt Count: 0
EGQ Discard Byte Count: 0