Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) - Manual (Page 184)

170 Multi-Service IronWare QoS and Traffic Management Configuration Guide
53-1003037-02
clear tm buffer-pool-stats slot
4
clear tm buffer-pool-stats slot
Clears the maximum buffer utilization from the TM.
Syntax clear tm buffer-pool-stats slot slot number
Parameters slot number The slot number specifies the decimal value of the slot from the traffic
manager.
Command
Modes
Privileged EXEC mode
Usage
Guidelines
The clear tm buffer-pool-stats slot command clears the maximum buffer utilization from the TM.
NOTES: When you clear the maximum queue depth statistics, you need to wait for the following
amount of time to read and update the max-queue-depth value again:
• 180 seconds for the BR-MLX-10Gx8-X, NI-MLX-10Gx8-M, NI-MLX-10Gx8-D, BR-MLX-100Gx2-X,
and 4X40 modules.
• Above 180 seconds for the 10Gx24-DM module.
Command
Output
The clear tm buffer-pool-stats slot command clears the following information:
Examples The following example clears maximum buffer utilization:
Brocade#clear tm buffer-pool-stats slot
History
Related
Commands
show tm buffer-pool-stats slot slot number
Output field Description
Maximum Buffer Size Specifies the maximum buffer size in bytes for both gold and bronze traffic and also
shows percentage of buffer used out of maximum packet buffer.
Maximum Occupied
Buffer Descriptors Specifies the maximum buffer pointers used for both gold and bronze traffic and also
shows percentage of buffer pointers used out of total buffer points.
Release Command History
Multi-Service IronWare
R05.5c This command was introduced.