Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) - Manual (Page 153)

Multi-Service IronWare QoS and Traffic Management Configuration Guide 139
53-1003037-02
Traffic manager statistics display
4
EnQue Byte Count: 51907696
DeQue Pkt Count: 464454
DeQue Byte Count: 51907696
TotalQue Discard Pkt Count: 0
TotalQue Discard Byte Count: 0
Oldest Discard Pkt Count: 0
Oldest Discard Byte Count: 0
Egress Counters:
EnQue Pkt Count: 701866
EnQue Byte Count: 78791072
Discard Pkt Count: 0
Discard Byte Count: 0
Syntax: show tm statistics ethernet slot/port
The slot/port variable specifies the slot and port number of the port group that you want to display
traffic manager statistics for.
NOTE
A traffic manager contains a specific number of ports depending on the Interface module as
described in
Table 35 . Specifying a particular port and slot gathers statistics for all ports that belong
to the same port group.
Displaying traffic manager statistics for an
interface module
The following command displays all traffic manager statistics for an interface module identified by
its slot number.
Brocade#show tm statistics slot 4
--------- Ports 4/1 - 4/20 ---------
Ingress Counters:
Total Ingress Pkt Count: 0
EnQue Pkt Count: 0
EnQue Byte Count: 0
DeQue Pkt Count: 0
DeQue Byte Count: 0
TotalQue Discard Pkt Count: 0
TotalQue Discard Byte Count: 0
Oldest Discard Pkt Count: 0
Oldest Discard Byte Count: 0
Egress Counters:
EnQue Pkt Count: 0
EnQue Byte Count: 0
Discard Pkt Count: 0
Discard Byte Count: 0
Syntax: show tm statistics ethernet slot/port
The slot slot-number option specifies an interface module that you want to display traffic manager
statistics from.