Nexo NEMO - Manual (Page 38)

NEXO NeMo User Guide v1.3
Page 38 of 50
LOG, ALERTS AND TASKS
NeMo warns you about the alerts that may occur on NXAMPs (e.g. a peak
alert), and about the on-going writing tasks from NeMo to one or several
NXAMPs (e.g. the writing of a new gain value), or other network
activities. The application also records on demand all the parameters of a
NXAMP in a log, which you can visualize and export.
The various alert types are the followings:
Log A lot of data is recorded in an internal database, which can be
visualized and exported.
Simple alert An alert is displayed in the Alerts & Tasks menu, with an orange
background.
Red alert A red alert is displayed as a pop-up. It is fully configurable: it is
triggered if the value of a parameter (e.g. amp temperature) of a
NXAMP is within a given range for a given duration.
Log
The log is recorded on a Log Record. You can create as many Log Records
as you like, for instance one per show, and before starting recording, you
have to select the one you want to record on.
The list of the parameters whose value is recorded into a log record is
given in
Appendix A. For each parameter, NeMo records every minute the
maximum, minimum and average of its observed value during the past
minute.
Viewing the log
You can visualize the values recorded from the NXAMPs in a Log Record,
either while recording or not, online or offline. To view, configure and record
the log, either:

Go to the
Preferences menu (from the welcome page), locate the Alerts
and Log section, and tap on View Log.

Or, while a session is open, tap on
(or when recording) in
the bottom-left corner of the main view of the Network tab.
The Log View appears: