Nexo NEMO - Manual (Page 30)

NEXO NeMo User Guide v1.3
Page 30 of 50
THE SCENE TAB
Tap on the Scene tab. The main view lists all the scenes of the selected
NXAMPs (from 0 to 31). A scene allows you to store the settings and the
current setup of a NXAMP. An empty scene is named
--Empty--. If a scene
is associated with a custom setup, cabinet and XO modes are displayed
next to the name of the scene.
Caution: scenes are not stored in NeMo, but directly in the NXAMP.
Before saving or recalling a scene, make sure that the selected devices
are really the ones you want to control. See
Important: selected devices.
Reading scenes
The list of scenes is read from the selected NXAMPs. This operation is
done once per NXAMP and per session. A progress bar shows the status.
To read again the scenes of the selected NXAMPs, tap on .
Current scene
The row of the selected scene is blue. If several amplifiers are selected,
with different scene numbers, the rows of the current scenes are green.
To reach the current scene(s) in the list, tap on in the toolbar.
Saving a scene
To save settings and current setups of all the selected NXAMPs ( warning:
settings and current setups may differ from a NXAMP to another):
1. Tap on the row of the scene you want to save. Warning: saving a scene
erase the data of the previous scene with that number.
2. Tap on the text field of the scene name. The keyboard appears. Enter
the desired name and validate.
3. Tap on [Save] to save the scene, or on [Cancel].
Recalling a scene
To recall a scene of all the selected devices ( warning: a scene with a given
number may differ from an amplifier to another):
1. Tap on the row of the scene to recall;
2. Tap on [Recall] to recall the scene, or on [Cancel].
Remark: saving and recalling scene are incompletely possible in the demo
mode.
Multiple values
If selected amplifiers have different current scene numbers, rows of all