Nexo NEMO - Manual (Page 27)

NEXO NeMo User Guide v1.3
Page 27 of 50
THE SETUP TAB
Tap on the Setup tab. This tab allows you to recall an existing setup
(called Standard), or to build a setup channel by channel (called Custom).
Before recalling a setup, make sure that the selected devices are really
the ones you want to control. See
Important: selected devices.
Displaying the toolbar (iPhone users only)
To display the toolbar, tap on [More].
Loading standard and custom setups
The setup library is read from the NXAMPs. This operation is likely to take
several minutes. There is one library per load. Reading the library of a
load is done once, the library being saved in your iDevice once read, as a
.nxload file. If the selected devices have different loads (for instance,
LOAD3_14 and LOAD3_16), there will be several reading operations. A
progress bar shows the status of these operations.
To reload the setup library, if the loading operation has not been
successfully achieved, go to the Preferences menu from the welcome
page, choose Loads, and delete the row corresponding to the load to read
again.
NeMo includes the latest available libraries at the time the app is
released, for which no reading phase is needed. It is impossible to read
them again.
Standard and custom setups
You can display either a view for standard or custom setups. Tap on
[Standard] or [Custom], at the right-hand side of the navigation bar, to
display the Standard or the Custom view.
Current setup
The current setups are the ones that are active in the selected NXAMPs.
Standard view
The current setup's row is blue. If several NXAMPs are selected, with
different current setups, the rows for these setups are green.
To reach the current setups (to see where they are in the list), tap on
in the toolbar.
To display only the setups belonging to the same family as the current
setup, tap on
[Same family] in the toolbar.
If one of the current setups is custom, an alert allows you to jump to the
Custom view.
Custom view