Nexo NEMO - Manual (Page 37)

NEXO NeMo User Guide v1.3
Page 37 of 50
and every time you press the [Config] or [Live] button.
SECURITY
There are three ways of ensuring NeMo security:
 The Wi-Fi network security, WPA2-Personal being recommended;
 AVS-Service security (go to AVS-Control Panel>Security to create
users. Users are granted a different level of rights. A “Viewer”
won’t be able to make any changes on NeMo);
 NeMo Live Mode, to modify the level of rights of use of control
objects of the interface.
Accessing the Live mode
To access the Live Mode, the safe mode of NeMo, either:
 Tap on [Live] on the index view, prior to open a session;
 While a session is open, tap on in the main view for more than 2
seconds to access the Live Mode. Then, tap on for more than 2
seconds to go back to the Config Mode.
NeMo forces you to stay in the Live mode if AVS-Service is secured and you
are a Viewer.
Configuring the Live Mode
To configure the Live Mode:
1. Go to the welcome page (the view when the app is launched, or after
a tap on [Disconnect];
2. Tap on [Preferences] to open the preferences menu;
3. Locate the section Security and tap on Configure Live Mode>.
4. For the different control types (Mute/Solo, Control, Setup, Scene
Tabs, and Undo/Redo), choose the level of security of your choice.
No security This is the security level of the Config Mode: every change is
allowed.
Ask for confirmation Displays an alert message every time a change is expected.
After confirmation, the change is passed on to the controlled
NXAMP(s).
Disable changes Changes are not allowed. Control objects are disabled.