The groups & devices menu – Nexo NEMO User Manual
Page 18
NEXO
NeMo User Guide v1.3
Page 18 of 50
From the Control tab, for either a selection of devices or the channels
of these devices;
From the Quick Mute/Solo view.
You can access the Quick Mute/Solo view from the map of the groups, by
taping on the label “XX devices” of a group cell. The following form appears:
You can then mute/solo either individual channels, or given channels for a
whole group, or devices, etc. Tap on
[Done] to dismiss the Quick
Mute/Solo view.
You can display or hide VU-meters by taping on
[VU-Meters].
The Groups & devices menu
iPad only:
This menu is accessible from every tab, via the button
[Groups & devices...],
at the left-hand side of the navigation bar.
iPhone only:
This menu is accessible from the Network tab.
A list shows all the groups that you have created, and a particular group:
All devices. There is a [mute|solo] button for each group, whose action
affects all the NXAMPs of a group. Tapping on
displays a list of all its
devices. Each NXAMP of the list has a
[mute|solo] button, and four LEDs