Nexo NEMO - Manual (Page 35)

NEXO NeMo User Guide v1.3
Page 35 of 50
2. Tap on , select the sessions you want to delete, and tap on [Clear
(xx)] (or go to the detailed view of a session and tap on [Delete]).
3. You will be asked to confirm this action, since it cannot be undone.
OTHER SAVED DATA
Setup libraries
NeMo automatically saves the setup libraries (loads) that have been read from
the NXAMPs, into .nxload files.
By default, NeMo includes .nxload files for the most recent loads.
Warning: load files
A .nxload file contains the list of all the setups the load of an NXAMP has got. But
it does not contain the firmware that you can open from NXWin and load into an
NXAMP!
The Loads menu
To go to the Loads menu:
1. Go to the welcome page (the view when the app is launched, or after
a tap on [Disconnect];
2. Tap on [Preferences] to open the preferences menu;
3. Tap on Loads. The newly displayed view contains the loads that have
been read from the NXAMPs in the first section, and the loads that are
included in NeMo in the second one.
Reading a load again
To read a load again:
1. Tap on from the Loads menu, and select the loads you want to
read again, and tap on [Clear (xx)] (or swipe your finger to the left on
the row of the load to read again and tap on [Delete]).
2. Connect to the Config mode so the load is read again.
Sharing a load
To avoid reading the same load on several iDevices, you can read it on
one iDevice, and share the .nxload file.
With iTunes:
1. Connect your first iDevice to a computer. From iTunes, go to the